The McLean Engineering Product Line Overview
A wide variety of water problems occur within the
United States. Those problems are predominantly determined by where you
live.McLean Engineering, Inc. specializes in treating all problems
found in Virginia. We have a wide variety of equipment to treat those
problems.Based on every home’s unique situation, we will
recommend a system or combination of systems that will most effectively
treat your problem. A detailed explanation of the systems we sell
– and the problems they treat – is offered below.Should you
wish to learn more about any one of the systems, please feel free to
contact us.
Removes
odor and kills bacteria
Also used
when there are large amounts of iron in the water as a complement to
the iron unit – not instead of
Helps keep
pipes clean by holding down iron build-up between the pump and filter
Removes
odor,kills bacteria and is used instead of the Well Pellet System
Often used
if the customer has a shallow well
Pot Ash Feed System
Balances pH
levels to between 7.0-7.5
Used when there
may be health issues in a home that require reduced sodium
No filtration
This system does
not have sodium
Soda Ash Feed System
Balances pH
levels to between 7.0-7.5
Does not
increase the hardness of the water
No filtration
Charcoal Filter
Charcoal is
the media that may be placed in either the traditional iron unit or
acid unit
Removes
odor and chlorine
Can also be
used to remove petroleum products
Sand Filters
Acid Correction
System: Used when there is a small amount of sand present
In-Line
Cartridge Filter: Small sediment filter that needs to be changed by the
customer on a regular basis
Galvanized
Tank: Tank used to filter sand out of the water supply when the
sediment amount is higher.Recommended placement in front of the
pressure tank in the water flow
Sand
Separator: Used most often when the available space is limited
Birm
Media used
to treat stubborn iron in traditional “iron
units.”Typically, the media used to treat iron is calcium
carbonate.If calcium carbonate cannot correct the problem, we can
change the media to birm
Birm units
are iron tanks that incorporate both Limestone Calcium and Birm (each
job is unique and media ratios may vary depending on water
contamination)
Removes
most odors (sulfur, etc.)
Removes
iron from the water supply including both ferric and ferrous
Filters
sediment down to 5 microns
Helps
correct the pH
Helps
eliminate any brown/yellow/red staining
Can convert the
Iron Removal System to a Birm Unit and change the media mix to add Birm
for more stubborn iron problems
Corrects
the acidity of the water (pH below 7.0)
Filters
sediment (sand, particles, etc.) down to 5 microns
Helps
remove any blue staining due to the corrosion of copper piping
Removes
hardness from the water
Can help
eliminate iron to compliment an Iron Removal System
Reduces
manganese
Removes copper
from water caused by pipe corrosion
Different
resins can be added to a softener to treat some issues
such as
tannin resin, etc.
Removes
organic color bodies from the water
Primary
purpose of the R/O system is to remove 90-95% of the dissolved solids
(or salts) in a stream of water
Removes
lead, nitrates, some petroleums
Only
equipment that will remove salt from the water source
Ultraviolet
light kills all bacteria and viruses
Requires no
materials or media components other than a replaceable light-bulb to be
changed annually